Parameter Setting - Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual

12-Port 1000BASE-TX L2 Managed PoE Switch with 2 SFP Dual Media Ports
4.17.4 P S
ARAMETER ETTING
This function is used to configure the parameters for each port in 802.1x port security application. Refer to the
following parameters description for details.
Parameter
Port
Port Control
reAuthMax (1-10)
txPeriod (1-65535 s)
Quiet Period (0-65535 s)
reAuthEnabled
reAuthPeriod (1-65535 s)
82
Table 4-47. Parameter Setting screen options.
Description
It is the port number to be selected for configuring its associated
802.1x parameters which are Port control, reAuthMax, txPeriod,
Quiet Period, reAuthEnabled, reAuthPeriod, max. Request,
suppTimeout, serverTimeout and Controlled direction.
This is used to set the operation mode of authorization. There are
three type of operation mode supported, ForceUnauthorized,
ForceAuthorized, Auto.
ForceUnauthorized: The controlled port is forced to hold in the
unauthorized state.
ForceAuthorized: The controlled port is forced to hold in the
authorized state.
Auto: The controlled port is set to be in authorized state or
unauthorized state depends on the result of the authentication
exchange between the authentication server and the supplicant.
Default: Auto
The number of authentication attempt that is permitted before the
port becomes unauthorized.
Default: 2
A time period to transmitted EAPOL PDU between the authenticator
and the supplicant.
Default: 30
A period of time during which we will not attempt to access the
supplicant.
Default: 60 seconds
Choose whether regular authentication will take place in this port.
Default: ON
A non-zero number seconds between the periodic re-authentication
of the supplicant