Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual page 36

Table 4-3. System Information screen settings.
Parameter
Model Name
System Description
Location
Contact
Device Name
System Up Time
Current Time
BIOS Version
Firmware Version
Hardware-Mechanical Version
Serial Number
Host IP Address
Host MAC Address
Device Port
RAM Size
Flash Size
Apply button
CHAPTER 4: Web-Based Management
Description
LPB200A
12-Port 1000BaseT/TX Managed PoE Switch.
The user-defined switch location.
This is the contact name and phone number for help.
Configure this parameter via the switch's user interface or
SNMP.
The user-defined switch's name. LPB200A is the default.
Time in days, hours, and minutes accumulated since the
switch was powered on. Its format is day of week, month,
day, hours: minutes: seconds, year. For example, Wed., Apr.
26, 12:10:10, 2006.
The switch's system time. Its format is day of week, month,
day, hours: minutes: seconds, year. For example, Wed., Apr.
26, 12:10:10, 2006.
The switch's BIOS version.
The switch's firmware version.
The electrical and mechanical switch version. The figure
before the hyphen is the electronic hardware version; the
one after the hyphen is the mechanical hardware version.
The switch's serial number; assigned by the manufacturer.
The switch's IP address.
The switch's management agent's Ethernet MAC address.
Displays all types and numbers of switch ports.
The switch's DRAM size.
The switch's Flash memory size.
Click on this button to apply the selections.
33