Aggregator View - Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual

4.16.2 A V
GGREGATOR IEW
To display the current port trunking information from the aggregator point of view.
Parameter
Aggregator
Method
Member Ports
Ready Ports
This page shows the detailed information of the LACP trunking group .
Parameter
Actor
Partner
System Priority
MAC Address
Port
Key
Trunk Status
Table 4-40. Aggregator View screen options.
Description
It shows the aggregator ID (from 1 to 12) of every port. In fact, every
port is also an aggregator, and its own aggregator ID is the same as
its own Port No.
Show the method a port uses to aggregate with other ports.
Show all member ports of an aggregator (port).
Show only the ready member ports within an aggregator (port).
Table 4-41. LACP Detail screen options.
Description
The switch you are watching on.
The peer system from this aggregator's view.
Show the System Priority part of a system ID.
Show the MAC Address part of a system ID.
Show the port number part of an LACP port ID.
Show the key value of the aggregator. The key value is determined
by the LACP protocol entity and can't be set through management.
Show the trunk status of a single member port. --- means not ready.
CHAPTER 4: Web-Based Management
75