Table of Contents
Advertisement
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly,
that is, in strict accordance with the manufacturer's instructions, may cause interference to radio
communication. It has been tested and found to comply with the limits for a Class A computing device in
accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide
reasonable protection against such interference when the equipment is operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference, in which case the user at his
own expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out
in the Radio Interference Regulation of Industry Canada.
Le présent appareil numérique n'émet pas de bruits radio électriques dépassant les limites applicables aux
appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radio électrique publié par
Industrie Canada.
This equipment complies with the requirements of the European EMC Directive 89/336/EEC.
Circuit devices are sensitive to static electricity, which can damage their delicate
electronics. Dry weather conditions or walking across a carpeted floor may cause you
to acquire a static electrical charge.
To protect your switch, always:
• Touch your computer's metal chassis to ground the static electrical charge before you
pick up the switch.
• Pick up the switch by holding it on the left and right edges only.
FEDERAL COMMUNICATIONS COMMISSION
AND
INDUSTRY CANADA
RADIO FREQUENCY INTERFEREN CE STATEMENTS
EUROPEANUNION DECLARATIONOF CONFORMITY
CAUTION
FCC AND ICRFI STATEMENTS
1
Advertisement
Table of Contents
