Table of Contents
Advertisement
4.21 TFTP Server
You can set up IP address of TFTP server in this page.
Parameter
Server
4.22 Log
This function shows the log data. The switch provides system log data for users. There are 17 private trap logs, 5
public trap logs. The switch supports total 120 log entries. For more details on log items, please refer to the
section of Trap/Alarm Configuration and SNMP Configuration.
Parameter
Log Data
No.
Time
Events
Auto Upload Enable
Upload Log
Clear Log
4.23 Firmware Upgrade
Software upgrade tool is used to help upgrade the software function in order to fix or improve the function.
The switch provides a TFTP client for software upgrade. This can be done through Ethernet.
The switch supports TFTP upgrade tool for upgrading software. If you assure to upgrade software to a newer
version one, you must follow two procedures:
1. Specifying the IP address where TFTP server locates. In this field, the IP address of your TFTP server
should be filled in.
2. Specifying what the filename and where the file is. You must specify full path and filename.
Table 4-53. TFTP Server screen options.
Description
Specify the IP address where the TFTP server locates. Fill in the IP
address of your TFTP server, then press Apply button to have the
setting taken effect.
Table 4-54. Log screen options.
Description
The Trap Log Data is displaying the log items including all SNMP
Private Trap events, SNMP Public traps and user logs occurred in
the system. In the report table, No., Time and Events are three
fields contained in each trap record.
Display the order number that the trap happened.
Display the time that the trap happened.
Display the trap event name.
Switch the enabled or disabled status of the auto upload function.
Upload log data through tftp.
Clear log data.
CHAPTER 4: Web-Based Management
87
Advertisement
Table of Contents
