E-Mail/Sms Configuration; Configuration - Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual

12-Port 1000BASE-TX L2 Managed PoE Switch with 2 SFP Dual Media Ports
4.18.2 E / S C
MAIL MS ONFIGURATION
Alarm configuration is used to configure the persons who should receive the alarm message via either email or
SMS, or both. It depends on your settings. An email address or a mobile phone number has to be set in the web
page of alarm configuration (See Fig. 3-51). Then, user can read the trap information from the email or the
mobile phone. This function provides 6 email addresses and 6 mobile phone numbers at most. The 22
different trap events will be sent out to SNMP Manager when trap event occurs. After ticking trap events, you
can fill in your desired email addresses and mobile phone numbers. Then, please click Apply button to
complete the alarm configuration. It will take effect in a few seconds.
SMS may not work in your mobile phone system. It is customized for different systems.
Parameter
Email
SMS

4-19 Configuration

The switch supports three copies of configuration, including the default configuration, working configuration
and user configuration for your configuration management. All of them are listed and described below
respectively.
Default Configuration
This is the manufacturer's setting and cannot be altered. In the Web user interface (UI) two restore default
functions are offered for the user to restore to the switch's default setting. The first function is Restore Default
Configuration for the included default IP address. This will restore the IP address to the default 192.168.1.1.
The other function is Restore Default Configuration without changing the current IP address. This will keep
the same IP address that you saved before.
Working Configuration
This is the configuration you are currently using. It can be changed any time. The configurations you are using
are saved into this configuration file. It's updated each time you press the Apply button.
84
Table 4-49 Email/ SMS Configuration screen options.
Mail Server: the IP address of the server transferring your email.
Username: your username on the mail server.
Password: your password on the mail server.
Email Address 1 – 6: email address that would like to receive the
alarm message
SMS Server: the IP address of the server transferring your SMS.
Username: your username in ISP.
Password: your username in ISP.
Mobile Phone 1-6: the mobile phone number that would like to
receive the alarm message
NOTE
Description