Detail Counter - Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual

Parameter
Simple Counter
Refresh Interval
Reset button
Port No.
Tx Byte
Rx Byte
Tx Packet
Rx Packet
Tx Collision
Rx Error Packet
4.3.4 D C
ETAIL OUNTER
The Detail Counter collects any information and provides the port traffic counting, whether the packet is good
or bad. To get to this screen, click on Detail Counter in the Port Configuration screen.
The Detail Counter window can show only one port counter information at the same time. To get to this screen,
click on Detail Counter in the Port menu. To see another port's counter, select it from the drop-down menu.
Each data field is 20 digits long. If the counting is longer than 20 digits (overflows), the counter will be reset
and restart counting. The data is updated every user-defined time interval. The valid range is 3 to 10 seconds.
The Refresh Interval is used to set the update frequency. The default update time is 3 seconds.
Table 4-12. Simple Counter screen options.
Description
Displays each port's traffic summary counting, including Tx Byte, Rx
Byte, Tx Packet, Rx Packet, Tx Collision, and Rx Error Packet.
Select a number (in seconds) from the drop-down menu.
Click on this button to reset the simple counter.
The port number.
Total transmitted bytes.
Total received bytes.
Total transmitted packets.
Total received packets.
Total collisions experienced while transmitting frames.
Total bad packets received.
CHAPTER 4: Web-Based Management
45