Tag-Based Group; Port-Based Group - Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual

12-Port 1000BASE-TX L2 Managed PoE Switch with 2 SFP Dual Media Ports
4.12.2 T -B G
AG ASED ROUP
It shows the information of existed Tag-based VLAN Groups, You can also easily create, edit and delete a
Tag-based VLAN group by pressing Add, Edit and Delete function buttons. User can add a new VLAN group
by inputting a new VLAN name and VLAN ID.
Parameter
VLAN Name
VID
SYM-VLAN
Member
Add Group
Delete Group
Edit a group
4.12.3 P -B G
ORT ASED
It shows the information of the existed Port-based VLAN Groups. You can easily create, edit and delete a
Port-based VLAN group by pressing Add, Edit and Delete function buttons. User can add a new VLAN group
by inputting a new VLAN name.
60
Table 4-27. Tag-Based Group screen settings.
The name defined by administrator is associated with a VLAN
group. Valid letters are A-Z, a-z, 0-9, " - " and "_" characters. The
maximal length is 15 characters.
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based and Double-tag mode.
While the SYM-VLAN function of the group is enabled, all packets
with this group VID will be dropped in case they are transmitted
from the ports that do not belong to this group.
This is used to enable or disable if a port is a member of the new
added VLAN, "Enable" means it is a member of the VLAN. Just tick
the check box ( ) beside the port x to enable it.
Create a new Tag-based VLAN. Input the VLAN name as well as
VID, configure the SYM-VLAN function and choose the member by
ticking the check box beside the port No., then, press the Apply
button to have the setting taken effect.
Just press the Delete button to remove the selected group entry
from the Tag-based group table
Just select a group entry and press the Edit button, then you can
modify a group's description, SYM-VLAN and member set.
ROUP
Description