Table of Contents
Advertisement
CHAPTER 5: CLI Management
stp
disable
Syntax: disable
Description: Disables the STP function.
Argument: None
Possible value: None
Example:
Giga Switch(stp)# disable
enable
Syntax: enable
Description: Enables the STP function.
Argument: None
Possible value: None
Example:
Giga Switch(stp)# enable
MCheck
Syntax: MCheck <range>
Description: Forces the port to transmit RST BPDUs. (RST is the Rapid Spanning Tree IEEE802.1d standard.
BPDU is an abbreviation for Bridge Protocol Data Unit. This is a message type used by bridges to exchange
management and control information.)
Argument: <range>: syntax 1, 5–7, available from 1 to 12
Possible value: <range>: 1 to 12
Example:
Giga Switch(stp)# Mcheck 1-8
153
Advertisement
Table of Contents
