Example 4. The same VLAN members can be at different switches with the same VID
12-Port 1000BASE-TX L2
Managed PoE Switch with 2
SFP Dual Media Ports
3.4 Configuring the Management Agent
There are two ways to start up the switch management function: RS-232 console and Ethernet port. Use one to
monitor and configure the switch. Follow the instructions in Sections 3.4.1 and 3.4.2.
Modify the IP address, subnet mask, default gateway, and DNS through the RS-232
console.
VLAN 1
Figure 3-6. Attribute-based VLAN diagram.
NOTE
CHAPTER 3: Installation
12-Port 1000BASE-TX L2
Managed PoE Switch with 2
SFP Dual Media Ports
VLAN 2
VLAN 3
21