Understanding the printer menus
SMTP Server Authentication
No authentication required
Use Device SMTP Credentials
Kerberos 5 Realm
Miscellaneous Security Settings menu
Panel Login Timeout
Remote Login Timeout
Specify the amount of time in seconds before the server stops trying to
send an e‑mail.
Note: 30 is the factory default setting.
Specify a reply address of up to 128 characters in the e-mail sent by the
Set the printer to use SSL for increased security when connecting to the
Disabled is the factory default setting.
When the Negotiate setting is used, the SMTP server determines if
SSL will be used.
Specify the type of user authentication required for printing privileges.
Note: "No authentication required" is the factory default setting.
Specify what credentials will be used when communicating to the SMTP
server. Some SMTP servers require credentials to send an e-mail.
None is the factory default setting for Device‑Initiated E‑mail and
Device Userid and Device Password are used to log in to the SMTP
server when Use Device SMTP Credentials is selected.
Limit the number and time frames of failed login attempts from the printer control
panel before all users are locked out.
Panel Login Timeout specifies how long the printer remains idle on the printer
control panel before automatically logging the user off. Select from 1 to 900
seconds. 30 seconds is the factory default setting.
Remote Login Timeout specifies how long a remote interface remains idle
before automatically logging the user off. Select from 1 to 120 seconds. 10
minutes is the factory default setting.