Saving money and the environment
Using Hibernate mode
Hibernate is an ultra‑low‑power saving mode.
Three days is the default amount of time before the printer enters Hibernate mode.
Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of
the Sleep button wakes the printer from Hibernate mode.
If the printer is in Hibernate mode, then the Embedded Web Server is disabled.
From the control panel, navigate to:
> Settings >
Select Press Sleep Button or Press and Hold Sleep Button, and then press
Press Hibernate >
Adjusting the brightness of the printer display
To save energy, or if you have trouble reading the display, adjust its brightness settings.
Using the Embedded Web Server
Open a Web browser, and then type the printer IP address in the address field.
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 18.104.22.168.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Click Settings > General Settings.
In the Screen Brightness field, enter the brightness percentage you want for the display.
Recycling Dell products
To return Dell products for recycling:
Visit our Web site at www.dell.com/recycle.
Select your country or region.
Follow the instructions on the computer screen.
> Settings >
> General Settings >