Download  Print this page

Embedded Web Server Does Not Open - Dell B5460dn User Manual

Laser printer.
Hide thumbs
Also See for B5460dn
User manual - 233 pages
Datasheet - 8 pages
Manual - 2 pages

Advertisement

Table of Contents
Troubleshooting
Action
Step 4
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
3
Reinstall the imaging unit, and then the cartridge.
b
Resend the print job.
Do vertical voids appear on prints?
Step 5
Replace the imaging unit, and then resend the print job.
Do vertical voids appear on prints?

Embedded Web Server does not open

Action
Step 1
a
Turn on the printer.
b
Open a Web browser, and then type the printer IP address.
c
Press Enter.
Does the Embedded Web Server open?
Step 2
Make sure the printer IP address is correct.
a
View the printer IP address:
From the TCP/IP section in the Network/Ports menu
By printing a network setup page or menu settings page, and then
finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
b
Open a Web browser, and then type the IP address.
Note: Depending on the network settings, you may need to type
"https://" instead of "http://" before the printer IP address
to access the Embedded Web Server.
c
Press Enter.
Does the Embedded Web Server open?
Yes
No
Go to step 5.
The problem is solved.
Contact
technical
The problem is solved.
support.
Yes
No
The problem is solved. Go to step 2.
The problem is solved. Go to step 3.
215

Advertisement

Table of Contents

   Related Manuals for Dell B5460dn

Comments to this Manuals

Symbols: 0
Latest comments: