Understanding the printer menus
Print All Order
Set the storage location for downloads.
RAM is the factory default setting. Storing downloads in the
RAM is temporary.
Storing downloads in a flash memory or in a printer hard disk
places them in permanent storage. Downloads remain in the
flash memory or printer hard disk even when the printer is
This menu item appears only if an optional flash memory or
printer hard disk is installed.
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more than the available memory.
Off is the factory default setting. Off sets the printer to retain
downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full  appears on the
printer display, but downloads are not deleted.
Specify the order in which held and confidential jobs are printed
when Print All is selected.
Note: Alphabetical is the factory default setting
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
"1 sided" is the factory default setting.
You can set two‑sided printing from the printer software.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users:
Choose File > Print, and then adjust the settings from the Print dialog and pop‑up