Additional printer setup
An optional memory card can be purchased separately and attached to the controller board.
1
Access the controller board.
For more information, see
2
Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may
cause damage.
3
Align the notch (1) on the memory card with the ridge (2) on the connector.
4
Push the memory card straight into the connector, and then push the card toward the controller board wall until
it clicks into place.
5
Reattach the controller board shield, and then the controller board access cover.
"Accessing the controller board" on page
1
13.
2
17