Understanding the printer menus
Show Supply Estimates
Do not show estimates
Run Initial setup
Home screen customization
Search Held Jobs
Jobs by user
Display the estimates of the supplies on the control panel,
Embedded Web Server, menu settings, and device statistics
Note: "Show estimates" is the factory default setting.
Minimize the use of energy, paper, or specialty media.
Off is the factory default setting. Off resets the printer to its
factory default settings.
Energy minimizes the power used by the printer.
Performance may be affected, but print quality is not.
Energy/Paper minimizes the use of power and of paper and
Paper minimizes the amount of paper and specialty media
needed for a print job. Performance may be affected, but
print quality is not.
Reduce the amount of noise produced by the printer.
Off is the factory default setting. This supports the
performance specifications for your printer.
On configures the printer to produce as little noise as
possible. This is best suited for printing text and line art.
Selecting Photo from the printer driver may disable Quiet
mode and provide better print quality and full‑speed
Instruct the printer to run the setup wizard.
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
"Country select" screen, the default becomes No.
Specify the default system of measurement for paper sizes.
US is the factory default setting.
The initial setting is determined by your country or region
selection in the initial setup wizard.
Change the icons and buttons that appear on the control panel.
For each icon or button, select from the following options:
Do not display
Note: "Do not display" is the factory default setting.