Ext Tab - Cisco SPA 525G2 Administration Manual

Cisco SPA IP Phone Field Reference

Ext Tab

Ext Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Parameter
PSK1 through PSK6
The Ext tabs vary by phone and depend on the number of extensions the phone
model supports.
This section describes the fields for the following Ext tab headings:
• General, page 252
• Share Line Appearance, page 273
• NAT Settings, page 274
• Network Settings, page 274
• SIP Settings, page 275
• Call Feature Settings, page 278
• Proxy and Registration, page 281
• Subscriber Information, page 283
• Audio Configuration, page 284
Description
To configure a speed dial script, enter the following
in the PSK field:
extensionname
fnc=sd;ext=
extnum ;nme= name
where fnc is the function of the key (speed dial), ext
extensionname
( ) is the extension being dialed,
the extension on the calling phone from which the
outbound call is sent, and
speed dial being configured.
To configure an XML script, enter the following in the
PSK field:
fnc=xml;url=http:// scriptURL.xml
where fnc is the function of the key (an XML script),
scriptURL.xml
is the URL where the script is located,
and scriptname is the name of the script.
B
outbound
@$PROXY;vid=
vid
name
is the name of the
;nme= scriptname
is
272