Cisco SPA 525G2 Administration Manual page 149

Configuring Security, Quality, and Network Features
Configuring SSL VPN on the Cisco SPA 525G/525G2
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
phone either boots in SPCP mode (if the Connect on Bootup field on the phone is
set to yes), or connects to the VPN manually (by the user pressing Connect on the
phone under the Network Configuration > VPN menu).
Click Submit All Changes.
User Settings
Then, enter the user settings for the phone, using either the configuration utility or
the phone itself.
To use the configuration utility:
:Log in to the configuration utility.
Click Admin Login and advanced. (Not applicable to the SPA 525G/525G2 in
SPCP mode.)
Click the System tab.
Under VPN Settings, enter the following:
• In the VPN Server field, enter the IP address of the VPN server.
• In the VPN User Name and Password fields, enter the username and
password to log in to the VPN server. These were created when you set up
the VPN on the server.
• (Optional) Enter the VPN tunnel group, if required by your VPN server.
• (Optional) To connect to the VPN when the phone is powered on, in the
Connect on Bootup field, choose yes.
Click Submit All Changes. If you did not choose yes in the Connect on Bootup field,
connect to the VPN on the phone by pressing the Setup button and choosing
Network Configuration > VPN > Connect.
To use the phone interface:
On the phone, press the Setup button.
Scroll to Network Configuration and press Select.
Scroll to Web Server and ensure that it is enabled. Press the right arrow key if it is
not enabled.
5
137