Cisco SPA 525G2 Administration Manual page 80

Customizing Cisco SPA and Wireless IP Phones
Configuring Bluetooth (Cisco SPA 525G/525G2 only)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
NOTE
STEP 8
STEP 9
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
To enable a Bluetooth headset from the phone:
Enable Bluetooth as described in the
525G2)" section on page
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
• Phone—Your Cisco SPA 525G2 will pair with a Bluetooth headset only.
Choose this option if you will not use the Cisco SPA 525G2 with a Bluetooth-
enabled mobile phone.
• Both—Your Cisco SPA 525G2 will use a Bluetooth headset, or operate with
your Bluetooth-enabled mobile phone (see
with a Bluetooth-Enabled Mobile Phone, page
SPA 525G2 will connect to only one device at a time (either the Bluetooth
headset or the Bluetooth-enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA 525G2, the order
of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,
and the device with a higher priority is activated first.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for your headset.
Depending on the network environment (for example, the number of Bluetooth
devices and noise level), your Bluetooth headset may not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the scan.
In the list of found devices, select your headset and press the Select button to edit
the profile.
Scroll to PIN and enter the PIN for your Bluetooth headset.
"Enabling Bluetooth (Cisco SPA 525G/
66.
Pairing Your Cisco SPA 525G2
69). Note that your Cisco
3
68