Unit 2 - Cisco SPA 525G2 Administration Manual

Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA 500 Series)
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Parameter
Subscribe Delay
Unit 2 Enable
Server Type
Test Mode Enable
Attendant Console Call
Pickup Code
BLF List URI
Unit 1 Key 1-32
For more information, see
Attendant Console.".

Unit 2

See the description for Unit 1 above. Enter a strings that define the extension and
other parameters associated with each lighted button on the second Cisco SPA
500S unit. Keywords and values are case-sensitive. The configuration script is
described in the "Setting Up the Cisco SPA 500S Attendant Console" section
on page 188.
Description
Length of delay before attempting to subscribe.
Defaults to 1.
Enables or disables the second Cisco SPA 500S unit
(each IP phone can have up to two Cisco SPA 500Ss
attached).
Selects the type of server used (Cisco SPA 9000,
BroadSoft, or Asterisk).
Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the Cisco SPA
500S are returned to off, all the keys become orange.
The IP phone must be rebooted after the test is
completed.
The star code used for picking up a ringing call.
Defaults to *98.
Automatically configures BLF subscriptions for all
users on a monitored list. See
Busy Lamp Field Auto-Configuration, page
Enter a strings that define the extension and other
parameters associated with each lighted button on the
first Cisco SPA 500S unit. Keywords and values are
case-sensitive. The configuration script is described in
the "Unit/Key Configuration Scripts" section on
.
page 192
Chapter 9, "Configuring the Cisco SPA 500S
B
Configuring BroadSoft
195.
293