Table of Contents
Advertisement
OPERATION
This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed
of FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected,
PLAY delay time, battery type, display of warnings when power is too low, voltage when the power supply is turned off.
Item
FR
SUPER
No.
DISP.
0000
100
SEARCH ENA
0001
0000
0001
0002
101
SHTL MAX
0003
0004
0000
0001
0002
0003
102
FF.REW MAX
0000
0001
103
SEEK SEL
0000
104
REF ALARM
0001
0000
108
PLAY DELAY
0015
0000
0001
122
STOP EE SEL
0000
0001
0002
147
WFM DISP
Setting
FR
SUPER
No.
DISP.
DIAL
Specifies method for transferring to the search mode (search dial operation).
0: Press the STILL button or turn the search dial to engage search dial operation.
KEY
1: Press the STILL button to engage search dial operation.
×8
Sets the maximum shuttle speed operation.
16
0: 8× normal speed
×
1: 16× normal speed
×32
2: 32× normal speed
×60
3: 60× normal speed
×100
4: 100× normal speed
32
Sets the maximum speed of FF and REW operation.
×
0: 32× normal speed
×60
1: 60× normal speed
×100
2: 100× normal speed
SEEK
3: Seek operation to start of clip
NOTE:
• When SEEK is selected, FF and REW operations for FF and REW commands
transferred via 9P and 1394 are performed at 100× normal speed. Note that seek
operations initiated by the FF and REW commands via 9P behave differently when
ORIG is set in setup menu No. 202 (ID SEL). The cursor moves to left or right in
thumbnail screens.
• The seek operation is available in playback mode.
CLIP
Specifies where a NEXT (SHIFT+FF) and PREV (SHIFT+REW) seek operation moves to.
0: The start of the clip
CLIP&T
1: The start of the clip or video text memo
NOTE:
This setting is not available during FF and REW operation.
OFF
Selects whether or not a warning should appear when REF.VIDEO is not connected.
0: Displays no warning
ON
1: Flashes the STOP lamp to warn
0
Sets PLAY delay time in frame increments.
|
|
NOTE:
15
Always 0 when setup menu No. 27 (VDCP CMD) is ON.
EE
Specifies whether to invoke the EE mode or playback mode when STOP is pressed.
0: EE mode
PB
1: Playback mode
NOTE:
• During IEEE1394 signal input, the EE mode is invoked regardless of this menu
setting.
• Selecting PB displays a freeze picture of the last video for VIDEO OUT and SDI OUT
output during thumbnail display.
OFF
Selects wave form monitor (WFM) display mode.
0: Not displayed
WAVE
1: Waveform display
VECTOR
2: Vector display
NOTE:
The waveform monitor is not displayed when there is no input.
• XX indicates factory default settings.
Settings and brief function description
177
Setup: Item Settings
Advertisement
Table of Contents
