Table of Contents
Advertisement
9.
RESET/NEW button
RESET button
Resets the CTL counter.
RESET + IN/OUT button
Hold down the IN/OUT button and press the RESET
button to reset the IN or OUT point for the player or
recorder, whichever is active.
NEW (SHIFT + RESET) button
Hold down the SHIFT button and press the RESET
button to create a new playlist (fulfils the same function
as [FILE] - [NEW]).
10.
VIDEO/A1/A2/A3 (SHIFT + A1)/A4 (SHIFT + A2)
button
Selects tracks for editing. Audio channels 5 to 8 cannot
be selected for editing, but when the source clip is
available, chose [SETTING] - [AUDIO CH] - [CH5-8]
from the menu to set output or disable output for
playback or Edit Copy.
➝Refer to "Creating New Clips from the Playlist (Edit
Copy)" (page 119).
11.
EDIT MODE (SHIFT + VIDEO) button
Press this button to toggle between insert and
overwrite editing.
12.
GO TO/A.DUB MODE button
GOTO button
Hold down the GOTO button and press the IN/OUT
button to move the playback location to the currently
set IN/OUT point.
Hold down the GOTO button and press the TRIM(+)/
TRIM(–) button to perform forward/backward frame
advance. (This operation is invalid for the player when
EXT PLAYER is selected on the playlist.)
A. DUB MODE (SHIFT + GOTO) button
Hold down the SHIFT button and press the GOTO
button to engage the A.DUB mode. The A.DUB mode
allows you to record voice-overs.
➝Refer to "Recording Voice-Overs" (page 109).
13.
LAST X/DELETE button
LAST X button
Press this button to cancel the last edit operation and
return to the previous editing stage. Pressing this
button again after cancelling restores the operation.
90
Editing: Playlist Function
DELETE (SHIFT + LAST X) button
Use this button to delete events during recorder
operation. Place the cursor on the event you want to
delete and press the SET button to select it. Then hold
down the SHIFT button and press the LAST X button to
delete the selected event.
14.
TRIM (+/–)/SLOT SELECT button
TRIM (+/–) button
Use to zoom in (+) or zoom out (–) the timeline.
IN/OUT + TRIM (+/–) button
• When no event is selected
Use to fine adjust the IN and OUT points set for the
player and recorder.
➝Refer to "Revising IN and OUT points for the player
and recorder" (page 99).
• When an event is selected (blue frame)
Use to fine adjust IN and OUT points for recorder of
selected event.
➝Refer to "Revising Registered Events" (page 101).
SHIFT + IN + TRIM (+/–) button
• When an event is selected (blue frame)
Use to simultaneously fine adjust the IN points for
selected events on the player and recorder.
➝Refer to "Revising Registered Events" (page 101).
SLOT SELECT (SHIFT + TRIM (+/–)) button
Select the slot of card that will be used for loading
video on the timeline from an external device (RS-
422A), external input (live recording), or hard disk.
15.
IN/SLOT CLIP button
16.
OUT/ALL CLIP button
IN/OUT button
Hold down the IN or OUT button to superimpose on the
monitor the time code of IN or OUT point set on the
player and recorder.
IN + OUT buttons
Hold down the IN and OUT buttons to display the
duration between the IN and OUT points set on the
player or recorder. If either one of the IN and OUT
points has not been set, it will show the duration up to
the current location.
SLOT CLIP (SHIFT + IN) button
During player thumbnail operation, hold down the
SHIFT button and press the IN button to change the
type of clips that are displayed.
➝Refer to "Changing Thumbnail Display" (page 51).
Advertisement
Table of Contents
