Using A Usb Keyboard - Panasonic AJ-HPM200P Operation Instruction Manual

Using a USB Keyboard

Connect a USB keyboard to the USB host terminal, select a
full keyboard or ten keypad menu to enable input from a USB
keyboard.
Selecting keyboard layout
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [THUMBNAIL] -
[SET UP] - [KEYBOARD].
4
Press the SET button.
This opens a menu for keyboard setup.
5
Move the cursor to the keyboard layout you want and
press the SET button.
◆ NOTE:
• Keyboard input is limited to alphanumeric characters.
• Some keyboards may not operate normally.
Introduction: Using the On-screen Keyboard
37