Video - Panasonic AJ-HPM200P Operation Instruction Manual

VIDEO

This menu is used for video settings.
Item
FR SUPER
No. DISP.
601 VIDEO INT SG
602 SDI IN MODE
DOWNCON
620
MODE
621 UPCONV MODE
626 D/C ENH H
627 D/C ENH V
638 IN U/C MODE
184
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 100%CB Sets the internal signal type. SMPTE and ARIB signals are available in HD mode only
(black in SD mode).
0001 75%CB
0: 100 % color bar
0002 SMPTE
1: 75 % color bar
0003 ARIB
2: SMPTE color bar
0004 BLACK
3: ARIB color bar
4: Black
0000 DR _ OFF
59.94Hz
0001
DR_ON
60-25Hz
Specifies the method for processing HD SDI input. (Available only for DVCPRO HD)
0: Records the 8 higher bits after rounding up the two lowest bits.
1: Records the signal with 8 higher bits, obtained by dynamic rounding.
NOTE:
Records 8 high-order bit signals after rounding off the 2 low-order bits during SD SDI
input.
0000 FIT_V
59.94Hz
0001 FIT_H
60-25Hz
0002 FIT_HV
Specifies the aspect ratio during down conversion.
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and
vertical axis. (The aspect ratio may be distorted.)
0000 FIT_V
59.94Hz
0001 FIT_H
60-25Hz
0002 FIT_HV
Specifies the aspect ratio during up conversion.
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and
vertical axis. (The aspect ratio may be distorted.)
0000 0dB
59.94Hz
0001 +1dB
Specifies whether or not horizontal outlines be emphasized in down-conversion.
0: 0 dB
1: +1 dB
0000 0dB
59.94Hz
0001 +1dB
Specifies whether or not vertical outlines be emphasized in down-conversion.
0: 0 dB
1: +1 dB
0000 FIT_V
59.94Hz
0001 FIT_H
Selects aspect ratio for up-conversion recording.
0002 FIT_HV
0: Side panel mode
1: Top and bottom are cropped
2: Stretch mode
Settings and brief function description
50Hz 29.97Hz 59-23Hz
only
50Hz 23.98Hz 29.97Hz
only
50Hz 23.98Hz 29.97Hz
only
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
only
50Hz
• XX indicates factory default settings.
60-24Hz 25Hz
59-23Hz 25Hz
59-23Hz 25Hz
60-25Hz only
only
60-25Hz