Display The Operation Window; How To Display The Operation Window - Panasonic WJ-HD309A Network Operating Instructions

Display the operation window

How to display the operation window

Start up the PC and operate this unit using the installed web browser.
The operation window will be displayed in the following procedures.
Screenshot 1
Start just after the PC is started up.
Screenshot 2
The web browser will start up and the set web site will
be displayed.
6
Step 1
Start up the web browser.
Step 2
Enter the IP address set to this unit in the address box,
and press the enter key.
Important:
• Refer to a system administrator for the set IP
address of this unit.
• It is impossible to access this unit from a PC without
a registered IP address when "ON" is selected for
"Host Authentication" on the " NW Setup 1" of
"Comm" menu.
Refer to a system administrator for further informa-
tion.
• Do not attach "0" before the numbers when entering
IP address.
Example
Correct: 192.168.0.50
Wrong: 192.168.0.050