Table of Contents
Advertisement
■ Waveform and vector display
The LCD screen can display either video waveform or vector
waveform.
During up-conversion, a waveform is displayed after up-
conversion.
◆ NOTE:
• A waveform is not displayed when there is no input signal.
■ HD-SDI remote
When the unit is connected to a camera-recorder with an
external device control, start and stop of recording of HD-SDI
signal input can be automatically controlled through
recording start and stop signals in the input.
■ USB keyboard
A USB keyboard can be connected to enable the following
functions.
● Entry and editing of clip metadata
● Network setup, browser
◆ NOTE:
• Some USB keyboards may not enable normal input.
■ VANC data recording/playback function
(59.94 Hz, 50 Hz only)
Recording and playback of ancillary data (VANC data) of up
to 5760 bytes per frame conforming to SMPTE 291M is
superimposed on the vertical blanking area of video.
19
Introduction: Features
Advertisement
Table of Contents
