Table of Contents
Advertisement
◆ NOTE:
• It is possible to start voice-over recording without setting an
OUT point at step 2, if so required. The voice-over recording
then continues to the end of the timeline or until the STOP button
or the OUT and ENTRY buttons are pressed.
• When the 24PN playlist format is set in setup menu No. 026 (PLY
LST FMT), the audio IN and OUT points are set in 4-frame
increments. If the recording starts or stops elsewhere, the IN
and OUT points are automatically corrected to fall within the
recording range.
• Starting the voice-over recording at the beginning of the timeline
is now allowed. Start recording at least 1 second from the
beginning of the timeline.
Revising Voice-Overs
Like normal events, audio events such as voice-overs can
also be revised.
➝Refer to "Revising Registered Events" (page 101).
112
Editing: Recording Voice-Overs
Advertisement
Table of Contents
