Table of Contents
Advertisement
3
Set the time code.
Use the TCG switch to set INT REGEN, INT PRESET or
EXT. If EXT is set, recording of TC and UB values on
AVCHD clips is permitted.
4
Set the audio level.
Perform AVCHD playback if required and use the PB fader
to set the audio level for AVCHD clip playback.
◆ NOTE:
• The recording level control is disabled and recording is made
using a UNITY level.
■ Recording operations
1
Display AVCHD thumbnails.
➝Refer to "Switching to AVCHD mode" (page 155).
2
Use the cursor buttons to select the clip you want to
dub.
To start dubbing midway in the clip, use the PLAY button
or other button to locate the start position and press the
STILL button to stop.
When dubbing is started by a thumbnail, dubbing starts
from the start of the selected clip.
◆ NOTE:
• When resume play is activated, dubbing starts from the resume
position.
3
Press the SHIFT + REC button.
Recording on the P2 card starts simultaneous with AVCHD
clip playback.
If the P2 card is not ready for recording or if PB FORMAT
and SYS FORMAT differ, pressing the SHIFT + REC
buttons will not start operation.
4
Use the STOP button to stop dubbing.
Stopping P2 card recording stops AVCHD clip playback
and the AVCHD thumbnail screen reappears.
◆ NOTE:
• During dubbing, recording does not start from the beginning of
an SD memory card.
• If input reference signal is not stable during dubbing, dubbed
video will be distorted.
Input stable reference signal, or perform dubbing without
inputting reference signal (internal reference).
AVCHD Recording and Playback: Using an Optional AVCHD Board
163
Advertisement
Table of Contents
