Operation - Panasonic aj-spd850p Operating Instructions Manual

Setup menus (continued)
USER menu <OPERATION>
No./Item
100 This selects the direct search dial

operation.

SEARCH ENA
0000 DIAL :
For direct search dial operations.
0001 KEY :
Operation is not transferred to the
search mode unless the search button
is pressed.
101 This sets the maximum speed for
shuttle operations.
SHTL MAX
0000
0001
0002
0003
0004 x100 : 100x normal speed
102 This sets the maximum speed for FF
and REW operations.
FF. REW MAX
0000
0001
0002 x100 : 100x normal speed
104 This selects whether to warn the
operator when the REF. VIDEO signal
REF ALARM has not been connected.
0000 OFF :
Warning is not given.
0001 ON :
Warning is given by the flashing
STOP lamp.
Note:
Video and audio output may be disturbed
when the reference video signal is not
input, so it is recommended that a
system which inputs the reference video
signal be used.
The underlined items indicates the initial setting.
Description
x8 : 8x normal speed
x16 : 16x normal speed
x32 : 32x normal speed
x60 : 60x normal speed
x32 : 32x normal speed
x60 : 60x normal speed
No./Item
This selects the memory card
105
recorder mode in which the EE status
is established when the MODE switch
AUTO EE SEL
is set to EE.
0000
0001
0002
0003
0004
0005
– 42 –
Description
S/F/R :
EE status is established in STOP, FF
and REW modes.
However, EE status is established at
all times when the card is ejected,
regardless of the MODE switch
setting.
STOP :
EE status is established in STOP
mode.
However, EE status is established at
all times when the card is ejected,
regardless of the MODE switch
setting.
BLACK :
EE status is established in STOP
mode.
However, when the card is ejected, if
the MODE switch is set to;
EE: EE status is established.
PB: The picture becomes black and
the sound is muted.
BLACK1 :
EE status is established in STOP, FF
and REW modes.
However, when the card is ejected, if
the MODE switch is set to;
EE: EE status is established.
PB: The picture becomes black and
the sound is muted.
GRAY :
EE status is established in STOP
mode.
However, when the card is ejected, if
the MODE switch is set to;
EE: EE status is established.
PB: The picture becomes gray and
the sound is muted.
GRAY1 :
EE status is established in STOP, FF
and REW modes.
However, when the card is ejected, if
the MODE switch is set to;
EE: EE status is established.
PB: The picture becomes gray and
the sound is muted.