Operation - Panasonic AJ-HPM100E Operating Instructions Manual

Time difference
–02:30
–02:00
–01:30
–01:00
–00:30

OPERATION

This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed of
FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected, PLAY
delay time, battery type, display of warnings when power is too low, voltage when the power supply is turned off.
Item
FR SUPER
No. DISP.
100 SEARCH ENA
101 SHTL MAX
102 FF.REW MAX
103 SEEK SEL
104 REF ALARM
108 PLAY DELAY
122 STOP EE SEL
98
Setup: Item Settings
City/Region
Central Atlantic time
Azores
Setting
FR SUPER
No. DISP.
0000 DIAL Specifies method for transferring to the search mode (search dial operation).
Specifies method for transferring to search dial operation.
0001 KEY
0: Press the STILL button or turn the search dial to engage search dial operation.
1: Press the STILL button to engage search dial operation.
0000 ×8 Sets the maximum shuttle speed operation.
0001 16 0: 8× normal speed
×
1: 16× normal speed
0002 ×32
2: 32× normal speed
0003 ×60
3: 60× normal speed
0004 ×100
4: 100× normal speed
0000 32 Sets the maximum speed of FF and REW operation.
×
0: 32× normal speed
0001 ×60
1: 60× normal speed
0002 ×100
2: 100× normal speed
0003 SEEK
3: Seek operation to start of clip
NOTE:
0000 CLIP Specifies where a NEXT(SHIFT+REW) and PREV(SHIFT+FF) seek operation moves to.
0: The start of the clip
0001 CLIP&T
1: The start of the clip or video text memo
NOTE:
0000 OFF Selects whether or not a warning should appear when REF.VIDEO is not connected.
0: Displays no warning
0001 ON
1: Flashes the STOP lamp to warn
0000 0 Sets PLAY delay time in frame increments.
| |
0015 15
0000 EE Specifies whether to invoke the EE mode or playback mode when STOP is pressed.
0: EE mode
0001 PB
1: Playback mode
NOTE:
◆ NOTE:
• The clock is accurate to within about ±30 seconds a month with the
power off.
• When the precise time is required, check and reset the time while
the power is on.
Settings and brief function description
• When SEEK is selected, FF and REW operations for FF and REW commands
transferred via 9P and 1394 are performed at 100× normal speed.
• The seek operation is available in STILL and STOP PB mode.
This setting is not available during FF and REW operation.
During IEEE1394 signal input, the EE mode is invoked regardless of this menu setting.
* An underlined setting indicates an initial value.