Table of Contents
Advertisement
Displaying Clip Thumbnails on a
Hard Disk
You can display thumbnails and manage clips stored on the
hard disk in the same way as clips on P2 cards. You can also
view video from the thumbnail display.
Thumbnail display (only for TYPE S hard
disk and P2 store)
1
Open the hard disk explorer screen.
A list of partitions appears.
2
Use the cursor buttons to select the partition whose
thumbnails you want to view and press the SET
button.
Thumbnails of the clips on the partition appears.
◆ NOTE:
• When multiple partitions are selected as target, pressing the
MULTI SEL (SHIFT + SET) button will display thumbnails for all
partitions on the target partitions.
SET
1)
1)
Clip information
Displays clip properties.
132
Connections: Using This Unit With a Hard Disk
2)
EXIT
1
2)
2
Hard disk information
SERIAL:
P2 card serial number
MODEL:
P2 card model name
SELECTED
A check mark
PART.:
selected partition.
SELECTED
This indication appears only when
PART. No.:
multiple partitions are selected and
a list of numbers of selected
partitions is displayed.
NUMBER (NO.): Partition no. (1 - )
DATE /TIME:
Date and time of partition
recording
VERIFY:
Verify setting and result during
recording
ON: FINISHED Verification was
ON: FAILED
OFF:
NAME:
User assigned partition name
SIZE/USED/
Total hard disk capacity/used
FREE CAP.:
capacity/remaining capacity
◆ NOTE:
• Press the EXIT button to return to the hard disk explorer screen.
• Use the TRIM +/– buttons to move to thumbnail displays on
previous and subsequent partitions without returning to the hard
disk explorer screen.
• Press the ENTRY button to select a displayed partition as a
target.
• Change the thumbnail screen display as necessary. These
changes are performed in the same way as when using P2
cards.
➝ Refer to "Changing Thumbnail Display" (page 51).
Thumbnail display (FAT)
Open the hard disk explorer screen.
A list of folders appears.
Use the cursor buttons to select the folder whose
thumbnails you want to view and press the SET
button.
Thumbnails of the clips in the folder will now appear.
◆ NOTE:
• When a volume is selected, pressing the MULTI SEL (SHIFT +
SET) button will display the thumbnails for all the selected
folders.
appears for the
successful
Verification failed
"- -" is displayed
on P2 store.
No verification
was performed
Advertisement
Table of Contents
