Panasonic AJ-HPM200P Operation Instruction Manual page 186

Item
FR SUPER
No. DISP.
659 Pb LVL(SD)
660 Pr LVL(SD)
661 BK LVL(SD)
662 V LEVEL
663 C LEVEL
664 HUE/C PHASE
665 SETUP/BK LVL
669 SETUP
673 CONTRAST
676 BLK CLIP
186
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 0.0%
59.94Hz
| |
Adjusts the PB level of SD SDI and analog composite output (– ∞ to 0 dB to +3 dB).
1000 100.0%
NOTE:
| |
This setting is available when CMPNT is set in setup menu No. 650 (STYLE).
1413 141.3%
0000 0.0%
59.94Hz
| |
Adjusts the PR level of SD SDI and analog composite output (– ∞ to 0 dB to +3 dB).
1000 100.0%
NOTE:
| |
This setting is available when CMPNT is set in setup menu No. 650 (STYLE).
1413 141.3%
0050 –10.0%
59.94Hz
| |
Adjusts the black level of SD SDI and analog composite output.
0150 0.0%
NOTE:
| |
This setting is available when CMPNT is set in setup menu No. 650 (STYLE).
0250 +10.0%
Adjusts the video level (– ∞ to 0 dB to +6 dB).
0000 0.0%
| |
NOTE:
1000 100.0%
• This setting is available when CMPNT is set in setup menu No. 650 (STYLE).
| |
• Video output level adjustment is available only for output.
2000 200.0%
Adjusts the chroma level (– ∞ to 0 dB to +3 dB).
0000 0.0%
| |
NOTE:
1000 100.0%
• This setting is available when CMPNT is set in setup menu No. 650 (STYLE).
| |
• Chroma level adjustment is available only for output.
1413 141.3%
0000 –31.0 Adjusts chroma phase (approximately –30° to +30°)
| |
NOTE:
0062 0.0
• This setting is available when CMPNT is set in setup menu No. 650 (STYLE).
| |
• Chroma phase level adjustment is available only for output.
0124 31.0
0050 –10.0% Adjusts setup level.
| |
NOTE:
0150 0.0%
• This setting is available when CMPNT is set in setup menu No. 650 (STYLE).
| |
• Setup level adjustment is available only for output.
0250 +10.0%
0000 THRU
59.94Hz
0001 CUT&AD
Specifies recording and output method for analog composite signals.
0: Records the input signal in its original form and outputs it without setup.
1: Records the signal with the 7.5 % setup processing removed and outputs it with the
7.5 % setup added.
0000 –30 Adjusts LCD monitor contrast.
| |
0030 0
| |
0060 30
0000 OFF
59.94Hz
0001 ON
60-25Hz
Specifies whether or not to clip signals below pedestal level for SD SDI and analog
composite output Y (luminance) signals.
0: Does not clip the signal
1: Clips the signal
Settings and brief function description
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
50Hz 29.97Hz 25Hz
23.98Hz 29.97Hz 59-23Hz
50Hz 23.98Hz 29.97Hz
only
only
60-25Hz
only
60-25Hz
60-25Hz only
only
59-23Hz 25Hz