Panasonic AJ-HPM200P Operation Instruction Manual page 190

Item
FR SUPER
No. DISP.
727 REC CH3
728 REC CH4
731 PB FADE
732 EMBEDDED AUD
762 AUD RATE CONV
772 MON FILTER
774 AVCHD A CH
190
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 CH1 Specifies the input signal to be recorded on the audio CH3.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
2: Audio input CH3 signal
0003 CH4
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 CH1 Specifies the input signal to be recorded on the audio CH4.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
0003 CH4 2: Audio input CH3 signal
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 AUTO Specifies audio processing to be performed between clips and edit points created using
playlist or Edit Copy.
0001 CUT
0: Depends on recording status.
204).)
1: Forcible cut.
NOTE:
AVCHD playback (option) is disabled.
0000 OFF Specifies whether or not audio data will be superimposed on HD SDI output and SD SDI
0001 ON output.
0: Audio data is not superimposed.
1: Audio data is superimposed.
0000 OFF
59.94Hz
0001 ON
60-25Hz
Enables recording and playback without using the rate converter (no digital filtering)
during digital audio input and output.
0: Recording and playback without use of the rate converter.
1: Recording and playback using the rate converter.
NOTE:
• Recording and playback on channels 1 to 8 are simultaneously turned ON or OFF.
Individual channel settings are not possible.
• When the rate converter is OFF, video input and digital audio input must be
synchronized. A reference signal selected using video input and OUT REF must also
be synchronized. (Noise may occur if not synchronized)
0000 OFF Selects whether signals output to the monitor, headphones and speaker will be filtered.
0: No filtering
0001 LOWCUT
1: Low-cut filtering
0000 CH1&2
59.94Hz
0001 CH3&4
Specifies the recording audio for AVCHD dubbing from P2 cards or AVCHD recording to
0002 CH5&6
an SD Memory Card (when setup menu No.170 (AVCHD REC) is set to ON).
0003 CH7&8
0: Audio selected as REC CH1 and REC CH2 will be recorded as CH1 and 2.
0004 CH12&34
1: Audio selected as REC CH3 and REC CH4 will be recorded as CH1 and 2.
0005 CH13&24
2: Audio CH5 and 6 will be recorded as CH1 and 2.
3: Audio CH7 and 8 will be recorded as CH1 and 2.
4: Audio selected as REC CH1 and REC CH2 are mixed and recorded as CH1, and audio
selected as REC CH3 and REC CH4 are mixed and recorded as CH2.
5: Audio selected as REC CH1 and REC CH3 are mixed and recorded as CH1, and audio
selected as REC CH2 and REC CH4 are mixed and recorded as CH2.
NOTE:
Displayed only when an AJ-YCX250G AVCHD codec board (optional) is installed.
Settings and brief function description
(Refer to the section "Audio V Fade Function" (page
50Hz 23.98Hz 29.97Hz
only
50Hz only
59-23Hz 25Hz