Figure 55 - Camera Ptz Setup Screen; Figure 56 - Ptz Device List - PACOM PDR-9LX User Manual

NOTE: You will only be able to set up PTZ devices if the PTZ port is set to RS232 or
RS485. You will not be able to use a modem if you are using the RS232 port for PTZ
control.
Highlight the box in the Product column for the PTZ camera you wish to configure and press
the button. A list of PTZ devices appears. Select your camera from the list and press the
button. You will need to connect the camera to the RS232 or RS485 connector on the back of
the DVR following the camera manufacturer's instructions.
You can assign IDs to each camera by highlighting the box under the ID heading and pressing
button. Change the number by highlighting it and using the Up and Down arrow buttons
the
to increase and decrease the number. The PTZ ID number can be set from 0 to 256.
Highlight the Setup... box and press the
Figure 55 — Camera PTZ setup screen.
Figure 56 — PTZ Device list.
button. The Port Setup window appears.
Digital Video Recorder
41