Audio Setup Screen; Figure 34 ─ Camera Ptz Setup Screen; Figure 35 ─ Ptz Device List; Figure 36 ─ Port Setup Window - PACOM 4-channel digital video recorder User Manual

User's Manual
NOTE: You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485.
Highlight the box in the Product column for the PTZ camera you wish to configure and press the
A list of PTZ devices appears.
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
Change the number by highlighting it and using the Up and Down arrow buttons to increase and decrease
the number. The PTZ ID number can be set from 0 to 256.
Highlight the Setup... box and press the
You can save your Camera changes by highlighting Save and pressing the
exits the screen without saving the changes.

Audio Setup Screen

Highlight Audio in the Devices menu and press the
26
Figure 34 ─ Camera PTZ setup screen.
Select your camera from the list and press the
the camera to the RS232 or RS485 connector on the back of the DVR following
the camera manufacturer's instructions.
Figure 35 ─ PTZ Device list.
button. The Port Setup window appears.
Configure the port's setting based on the PTZ camera manufacturer's
instructions.
Figure 36 ─ Port Setup window.
button. You will need to connect
button. The Audio setup screen appears.
button.
button.
button. Selecting Cancel