Event Status Screen; Figure 97 - Event Status Screen - PACOM PDR-9LX User Manual

Digital Video Recorder

Event Status Screen

Highlight Event Status in the Event menu and press the button. The Event Status screen
appears.
Figure 97 — Event Status screen.
The Event Status screen displays the status of the DVR's systems and inputs. Events will be
highlighted, and related channels or events will flicker for five seconds when detected.
Alarm-In, Motion, Video Loss and Text-In will be highlighted when each event is detected
based on the settings you made in the Alarm-In, Motion Detection and Text-In setup screen on
the Event menu.
Check Alarm-In and Check Recording will be highlighted when each event is detected based
on the settings you made in the System Event setup screen on the Event menu.
Panic Record will be highlighted while the DVR is in the panic recording mode.
Disk Almost Full will be highlighted when the DVR is not in the Recycle mode and the level of
disk usage reaches the Disk Almost Full percentage you made in the System Event setup screen
on the Event menu. Disk Full will be highlighted when the DVR is not in the Recycle mode and
all available storage space has been used.
Highlighting the Storage tab will display the hard disk drive status. Refer to the Storage
Screen section for details.
73