Recording Settings; Figure 66 - Record Menu - PACOM PDR-9LX User Manual

User's Manual
Highlight the box beside Port and select from None, RS232 and RS485. If the RS232 port and
RS485 port are in use for PTZ control, networking or text input, the remote keyboard cannot be
configured.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits and Stop Bits for the
device you are connecting to the DVR.
Highlight the box beside Remote Control Product and select the device from the list.
You can save your Remote Control settings by highlighting Save and pressing the button.
Selecting Cancel exits the screen without saving the changes.

Recording Settings

Your DVR offers a variety of flexible recording modes. You can set it up to record all the time
or to only record events. It can be set up to continue recording once the hard disk drive is full by
recording over the oldest video, or you can set it up to alert you when the hard disk is full and
stop recording.
Figure 66 — Record menu.
48