Active Cameo Mode; Pip Mode - PACOM PDR-9LX User Manual

User's Manual
Pressing the button causes the cameras to display sequentially. When in one of the
SEQUENCE
multi-view formats, pressing this button will cause the DVR to go through predefined screen
layouts (Full Sequence). Or, the bottom, right screen will display live cameras sequentially
(Cameo Sequence). Selecting another display mode, or pressing the button again
SEQUENCE
exits the Sequence mode. When in one of the multi-view formats, pressing the Left or Right
arrow buttons will cause the DVR to go to the previous or the next page. For example, if you
press the Right arrow button in the 2x2 format, the DVR changes pages as follows:
If all the cameras in a page are Off, have lost video or are set to Covert (unless the user has
authority to view covert cameras), that page will be excluded from the sequence.
NOTE: The Full Sequence for the full sequence monitoring and the Cameo Sequence for
the cameo sequence monitoring should be selected in the Display setup screen
(Sequence tab).
Pressing the button will freeze the current image on the screen until you press the
FREEZE
displays in bottom-left corner if Freeze is
button again. While in the Freeze mode, the icon
selected in the Display setup screen (OSD tab).
To display cameras sequentially on a spot monitor, press the button and select the Spot
SPOT
Monitor and Sequence from the menu.

Active Cameo Mode

You can enter the Active Cameo mode by pressing the button in any multi-view format. The
yellow outline surrounding the video indicates the active cameo, and pressing the arrow buttons
moves the active cameo. Pressing the button while in the Active Cameo mode exits the
Active Cameo mode. The active cameo mode will remains in effect for 15 seconds if there is no
further operation.
In active cameo mode, press the button for the camera you want displayed as active cameo.
After setting the camera number to active cameo, the DVR moves the active cameo to the next
cameo. You can change the screen layout in this way.

PIP Mode

You can display a Picture-in-Picture by pressing the button. You can change the
DISPLAY
location of the PIP counterclockwise and clockwise by pressing the Up and Down arrow
buttons and change its size by turning the Jog Dial clockwise or counterclockwise.
76