PACOM PDR-9LX User Manual page 108

User's Manual
You can search video from the first to last recorded images, or you can set the start and stop
times and dates.
Highlight the box beside From and press the button to toggle between On and Off. When set
to Off, you can enter a specific Date and Time. When set to On, the search will be from the first
recorded image.
Highlight the box beside To and press the button to toggle between On and Off. When set to
Off, you can enter a specific Date and Time. When set to On, the search will be from the last
recorded image.
Highlight the box beside Channels and press the button. You can select the cameras that
you would like to include in your video clip.
Highlight the box beside Password and press the button. A virtual keyboard appears
allowing you to enter the password for reviewing the video clips.
Highlight the box beside Dest. and press the
button. You can select the storage device on
which you would like to record the video clip. You can choose from Internal CD-RW, Internal
DVD RW, USB Storage and USB CD-RW.
CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.
NOTE: While copying video clips on the CD-RW or DVD RW, the recording speed might
decrease.
NOTE: While copying video clips on the CD-RW or DVD RW, the DVR will stop archiving
video data until clip copy is finished.
NOTE: When the error message "Firmware update of the optical drive is required"
displays, update the firmware of the installed CD-RW drive or DVD RW drive. Please
follow the instructions described in Chapter 3 – Configuration – System Information
section.
The DVR automatically assigns a file name to the video clip. However, you can give the video
clip file a different name. Highlight the box beside File Name and press the
button. A
virtual keyboard appears. Enter a file name for the video you are backing up and select Close.
The DVR will automatically add the camera number (for example "01") and ".exe" to the file
name. If you want to save the file in a specific folder, enter the folder name followed by a "/".
For example: "folder/filename"
NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, ", <, >, |
Highlight Verify After Burning and press the button. This will toggle between On and Off.
When this feature is On, you can verify that the data is written on the CD-RW or DVD RW
properly.
96