Image Adjustment; Figure 101 - Ptz Menu; Figure 102 - Ptz Controls - PACOM PDR-9LX User Manual

You can use a mouse for convenient PTZ control. Position the mouse pointer at the bottom of
the screen, and the following PTZ toolbar will display.
Clicking on the left side exits the toolbar. If you want to display the toolbar again, position
the mouse pointer at the bottom of the screen. Change the toolbar location by clicking the
empty space on the left side of the toolbar and drag it to where you want it located on the screen.
Use the arrow buttons on the toolbar to pan or tilt the camera in the direction you want. The
other controls on the toolbar perform as described below:
Zoom In / Out
Focus Near / Far
Iris Open / Close
Set / Load Preset

Image Adjustment

NOTE: It is important that cameras and monitors are correctly installed and adjusted
prior to making any image adjustments using the DVR's controls.
If a user who has Color Control authority logs into the system, the user can adjust the image.
Pressing and holding a camera button for a few seconds displays an image adjustment dialog.
You can control brightness, contrast, hue and saturation for each camera.
Figure 101 — PTZ menu.
Figure 102 — PTZ controls
Digital Video Recorder
79