Figure 116 - Motion Search Option Screen - PACOM PDR-9LX User Manual

User's Manual
You can search video from the first to last recorded images, or you can set the start and stop
times and dates.
Highlight the box beside From and press the
to Off, you can enter a specific Date and Time. When set to On, the search will be from the first
recorded image.
Highlight the box beside To and press the
Off, you can enter a specific Date and Time. When set to On, the search will be from the last
recorded image.
Highlight the box beside Type and press the
Search and Museum Search. Motion Search detects motion in the defined area. Museum
Search detects if a defined object has moved.
Highlight the box beside Zone and press the
a grid overlaid. You can turn sensor blocks On and Off to define the area of the picture in which
you want to search for motion.
NOTE: Defining the area of the image in which you want to search for motion is nearly
identical to setting up the DVR for Motion Detection. Please refer to Motion Detection
Screen in Chapter 3 — Configuration for more detailed instructions on setting up the
detection blocks.
NOTE: When setting the Museum Search Zone, the zone should be placed inside of the
border line of the target object. If the selected block is placed on the boarder line, the
sensitivity of the Museum Search may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted
object.
Highlight the box beside Sensitivity and press the
(low sensitivity) to 5 (high sensitivity).
Highlight the box beside Min. Blocks and press the
number of sensor blocks that must be activated. Setting the Min Blocks will only be available if
Motion Search is selected.
94
Figure 116 — Motion Search Option screen.
button to toggle between On and Off. When set
button to toggle between On and Off. When set to
button. You can select between Motion
button. An image from the video appears with
button. You will be able to select from 1
button. You will be able to set the