Ptz; Figure 23: Camera - Ptz Setup Screen - PACOM PDR960H-4E User Manual

User's Manual

PTZ

NOTE: You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485.
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number. The
PTZ ID number can be set from 0 to 256.
Highlight the Setup... box and press the
36
Figure 23: Camera – PTZ setup screen.
Highlight the box in the Product column for the PTZ camera you wish to configure
and press the button. A list of PTZ devices appears. Select your camera from
the list and press the
or RS485 connector on the back of the DVR following the camera manufacturer's
instructions.
button. The Port Setup window appears.
Configure the port's setting based on the PTZ camera manufacturer's instructions.
button. You will need to connect the camera to the RS232
button. Change