Figure 79 - Motion Detection Min. Blocks Screen; Figure 80 - Motion Detection Zone Screen - PACOM PDR-9LX User Manual

Digital Video Recorder
Figure 79 — Motion Detection Min. Blocks screen.
Turning Zone View On will allow you to observe how the DVR is reacting to motion. When in
the motion viewing mode, the detection zone of video will be displayed in green. Any detected
motion within the zone will be displayed in red.
You can define the area of the image where you want to detect motion; e.g., a doorway.
Highlight the box under the Zone heading, and press the button. The Motion Detection
Zone screen displays.
Figure 80 — Motion Detection Zone screen.
The Motion Detection Zone screen is laid over the video for the selected camera. You can set
up motion detection zones by selecting or clearing blocks.
NOTE: You can set up motion zones one block at a time in groups of 8 or 16 individual
block groups (9- and 16-channel DVR respectively). A block group is positioned within
the image area using the Up and Down arrow buttons, and individual blocks within the
block groups are selected or cleared using the camera buttons.
Press the button to display the menu screen. The menu on the setup screen has the following
functions:
59