Configuring Devices; Figure 53 - Device Menu - PACOM PDR-9LX User Manual

Pacom digital video recorder9- and 16-channel models
Table of Contents

Advertisement

Digital Video Recorder
Highlight LAN and press the
button to toggle between On and Off. When LAN is turned On
you can change the IP addresses.
Highlight the IP Address box that you want to change and press the
button. Enter the IP
address of the computer you want contacted during an event. You can enter up to five IP
addresses.
Highlight the box beside Retry and enter the number of times you would like the DVR to try
contacting the computer. You can select from 1 to 10 retries.
If the modem was enabled in the Network screen, you can set up the DVR to contact a computer
running RAS. Highlight Modem and press the
button to toggle between On and Off. When
Modem is turned On you can enter a telephone number.
Highlight the box beside Remote Server Phone Number and enter the telephone number of
the computer running RAS.
Highlight the box beside Outside Line Call and enter any numbers that must be dialed for an
outside line for your telephone system; for example, "9".
Highlight the box beside Callback Phone Number and enter the telephone number of the
DVR.
You can save your Notification changes by highlighting Save and pressing the
button.
Selecting Cancel exits the screen without saving the changes.

Configuring Devices

You can configure the video, audio, alarm, display and remote control devices connected to the
DVR.
Figure 53 — Device menu.
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdr-16lx

Table of Contents