Figure 28 Camera Setup Screen; Figure 29 Camera Ptz Setup Screen - PACOM RDRH-EL104 User Manual

Figure 28 Camera setup screen.
Highlight the PTZ tab, and the PTZ setup screen displays.
Figure 29 Camera PTZ setup screen.
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
button. Change the number by highlighting it and using the Up and Down arrow buttons to
increase and decrease the number. The PTZ ID number can be set from 0 to 256.
Highlight the Setup... box and press the
Highlight the box in the Product column for the PTZ camera you wish
to configure and press the
Select your camera from the list and press the
to connect the camera to the RS485 connector on the back of the DVR
following the camera manufacturer's instructions.
button. The Port Setup window appears.
Configure the port's setting based on the PTZ camera manufacturer's
instructions.
4-Channel Digital Video Recorder
You can turn the camera number On or Off, and
you can change the Title of each camera using
the virtual keyboard.
NOTE: You will only be able to set up PTZ
devices if the PTZ port is set to RS485.
button. A list of PTZ devices appears.
button. You will need
31