Figure 91 - Text-In Actions 2 Screen - PACOM PDR-9LX User Manual

User's Manual
Highlight the box under the Alarm-Out and press the
appears. You can associate as many Alarm-Outs with the Text Input as you wish. When the
DVR detects text input, it triggers output signals on all the associated Alarm-Out connectors.
You can also have the DVR's internal buzzer sound if text input is detected.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to
the Event mode in the Alarm-Out setup screen (Schedule tab).
Highlight the box under the Notify and press the
and Off by highlighting Notification and pressing the
items On and Off by highlighting that item and pressing the
the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the
Notification setup screen and the DVR should be registered in the RAS (Remote
Administration System).
Highlight the desired box under the PTZ heading, and press the
appear. Select the preset positions for each PTZ camera, where you want PTZ cameras to move
to when the DVR detects text input.
Highlight the box under the Spot Monitor and press the
and cameras appears. Each SPOT monitor can be associated with a camera. The DVR will
display the associated camera on the SPOT monitor whenever it detects an input on the selected
text-in device.
You can save your Text-In changes by highlighting Save and pressing the
Cancel exits the screen without saving the changes.
68
Figure 91 — Text-In Actions 2 screen.
button. A list of Alarm Outputs
button. You can toggle the entire list On
button. You can toggle the individual
button. Highlight OK and press
button. A list of PTZ presets
button. A list of SPOT monitors
button. Selecting