Table of Contents
Advertisement
User's Manual
FF (Fast Forward) Button
Pressing the
button plays video forward at high speed. Pressing the button again toggles the
FF
playback speed from
The button on the front panel is also used to save Presets while in the PTZ mode.
FORWARD Button
Pressing the
FORWARD
used to load a Preset View in the PTZ mode.
DISPLAY Button
The
button has two functions. First, it toggles between different display formats. The
DISPLAY
available formats are: 4x4, 3x3, 2x2 and PIP. Second, pressing and holding the button for 5
seconds or longer it will switch the video output between Video Out (BNC or SVHS Out) and
VGA Out.
SEQUENCE Button
When in the live mode, pressing the
FREEZE Button
Pressing the
FREEZE
PTZ Button
Pressing the
button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control
PTZ
properly configured cameras.
ZOOM Button
Pressing the
ZOOM
temporarily displays showing what area of the screen has been enlarged. You can use the arrow
buttons to move the rectangle to another area. Pressing the
size between 2x, 3x and 4x.
SPOT Button
Pressing the
SPOT
Monitors. After selecting the monitor you can opt to have that Spot Monitor display a single
camera or all cameras sequentially. The infrared remote control allows you to go directly to the
individual Spot Monitor menus.
14
,
and
button goes to the next image. The button on the front panel is also
SEQUENCE
button freezes the current live screen.
button zooms the current image on the screen. A PIP with a rectangle
button allows you to select which cameras will display on the four Spot
. The screen displays
button displays live channels sequentially.
,
and
(Enter) button toggles the zoom
respectively.
Hide quick links:
Advertisement
Table of Contents
