Figure 29 - Camera Setup Screen; Figure 30 - Camera Ptz Setup Screen - PACOM 8-Channel User Manual

Figure 29 — Camera setup screen.
Highlight the PTZ tab, and the PTZ setup screen displays.
Figure 30 — Camera PTZ setup screen.
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number. The PTZ
ID number can be set from 0 to 256.
Highlight the Setup... box and press the
Highlight the box in the Product column for the PTZ camera you wish to configure
and press the button. A list of PTZ devices appears. Select your camera from
the list and press the
or RS485 connector on the back of the DVR following the camera manufacturer's
instructions.
button. The Port Setup window appears.
Configure the port's setting based on the PTZ camera manufacturer's instructions.
You can turn the camera number On or Off, and you can
change the Title of each camera using the virtual keyboard.
You can also determine which cameras will display on the
monitors by selecting Normal, Covert 1 or Covert 2 from
a drop-down list in the Use column.
NOTE: When selecting the Covert 1, the DVR displays
the camera title and status icons on the covert
video. When selecting the Covert 2, the DVR
displays only camera title on the covert video.
NOTE: A user who does not have Covert Camera View
authority cannot view video from cameras set to
Covert 1 or Covert 2 in both the live monitoring
and playback modes.
NOTE: You will only be able to set up PTZ devices if the
PTZ port is set to RS232 or RS485.
button. You will need to connect the camera to the RS232
Digital Video Recorder
button. Change the
27