Figure 83 - Motion Detection Actions 1 Screen - PACOM PDR-9LX User Manual

Digital Video Recorder
Figure 83 — Motion Detection Actions 1 screen.
The DVR can be set to react to motion detection differently for each camera. Each camera can
be associated with another camera, trigger an Alarm-Out connector, sound the DVR's internal
buzzer, notify a number of different devices, move PTZ cameras to preset positions, and/or
display a camera on a SPOT monitor.
NOTE: You can associate multiple cameras with a camera that detects motion.
Highlight the box under the Record heading and press the
button. A list of cameras appears.
You can associate as many cameras with that camera as you wish. If the DVR detects motion on
the selected camera, it starts recording video from all the associated cameras.
NOTE: For the Record action, the camera you select should be set to the Event or Time
& Event recording mode in the Record Schedule setup screen.
Highlight the box under the Alarm-Out heading and press the
button. A list of Alarm
Outputs appears. You can associate as many Alarm-Outs with that camera as you wish. When
the DVR detects motion on the selected camera's input, it triggers output signals on all the
associated Alarm-Out connectors. You can also have the DVR's internal buzzer sound if
motion is detected on the selected camera.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to
the Event mode in the Alarm-Out setup screen (Schedule tab).
Highlight the box under the Notify heading and press the button. You can toggle the entire
list On and Off by highlighting Notification and pressing the button. You can toggle the
button. Highlight OK
individual items On and Off by highlighting that item and pressing the
and press the button to accept your changes.
61