Appendix B - Reviewing Video Clips; Figure 119 - Clipplayer Screen - PACOM PDR-9LX User Manual

Digital Video Recorder
Appendix B — Reviewing Video Clips
You do not need to install any special software on your personal computer to review the video
clips. The copied video clip contains the ClipPlayer program.
If you used a USB device, disconnect either the external USB-IDE hard disk drive or USB flash
drive from the DVR, and connect it to your PC. If you used a recordable CD, insert the CD in
your computer's CD drive. Double-clicking the target clip file starts the ClipPlayer program.
NOTE: It is suggested that the computer used for the ClipPlayer program has at least an
800MHz Pentium III. If your CPU is slower than this, video clips recorded at maximum
speed with very high image quality will be played back slowly. Also DirectX 8.0 or higher
is required to run Clip Player, and a VGA card with 16MB or more video RAM is
recommended for proper operation.
Figure 119 — ClipPlayer screen.
The ClipPlayer Screen displays the clip images.
101